User Manual Q&AAnswer
Feb 10, 2025 - 11:03 PM
To ignite the gas burners on the NEFF T26BR4 Series Built In Hob, follow these steps:
1. Press and hold the control xxxx for the desired burner.
2. Turn the control xxxx anti-clockwise to the highest level.
3. Keep the control xxxx pressed in.
4. Sparks will be generated and the flame will ignite.
5. Wait a few seconds and release the control xxxx .
6. Adjust the flame size by turning the control xxxx to the required position.
Note: If the burner does not ignite after 15 seconds, turn the control xxxx to the "Off" position and open a door or window to ventilate the room. Wait at least one minute before attempting to ignite the burner again. If the burner flames are accidentally extinguished, turn off the burner control and wait for at least one minute before re-igniting.
For more detailed instructions and safety information, please refer to the NEFF T26BR4 Series Built In Hob Instruction Manual.
Add New Comment