User Manual Q&AAnswer
Feb 10, 2025 - 11:02 PM
To install the Verona VPFSEE365D Series Electric Range, please follow these steps:
1. Read and understand the installation instructions provided in the manual.
2. Ensure that you have all the necessary tools for installation.
3. Make sure that the range is properly grounded according to local codes and regulations.
4. Remove any protective film on steel and aluminum parts before installing or using the appliance.
5. Install the anti-tip bracket to prevent the range from tipping over. Follow the instructions in the manual to properly install and engage the anti-tip bracket.
6. Ensure that there is proper clearance around the range. The range should not be installed directly adjacent to sidewalls, tall cabinets, tall appliances, or other side vertical surfaces above 36" high. Refer to the manual for specific clearance requirements.
7. Install the adjustable feet to the base of the cooker before use. Use a rolling lift jack to move the range into its final position to avoid damaging the legs or internal connectors.
8. If applicable, assemble and install the backguard according to the instructions in the manual.
9. Connect the range to the electrical supply. Follow the electrical requirements and guidelines provided in the manual. It is recommended to use a qualified electrician for the installation.
10. Verify that the anti-tip bracket is properly installed and engaged by sliding the range forward and checking for secure attachment to the floor or wall. Refer to the manual for more details on verifying the installation of the anti-tip bracket.
Please note that these are general installation instructions. For specific details and step-by-step instructions, refer to the Verona VPFSEE365D Series Electric Range Instruction Manual.
Add New Comment