User Manual Q&AAnswer
Feb 10, 2025 - 10:34 PM
To reverse the door swing on your Lec L5017W-S-B White Under Counter Larder Fridge, follow these steps:
1. Ensure the unit is unplugged and empty.
2. Tilt the unit backwards and rest it on something solid, like a chair just below the top panel.
3. Remove the 2 screws on the back and lift the top cover away from the fridge.
4. Remove the three screws holding the upper hinge in place and lift the door off, placing it on a padded surface to prevent scratching.
5. Swap the bottom bushing and bottom bushing cap of the upper door, ensuring the bottom bushing key is in the correct position for proper insertion.
6. Remove the lower screws, hinge bracket, and adjustable feet from the unit bottom.
7. Remove the xxxx -type adjustable feet from the other side of the unit bottom and transfer it to the corresponding position on the opposite side.
8. Reattach the two lower screws, hinge bracket, and adjustable feet to the opposite side of the unit bottom, loosely securing them.
9. Carefully set the upper door back into place, ensuring it is aligned horizontally and vertically so that the seals are closed on all sides.
10. Tighten the top hinge securely.
11. Insert the hinge bracket and xxxx it to the top of the unit, using a spanner if necessary.
12. Put the top cover back and fix it in place with the screws.
13. With the door closed, check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge.
14. Re-adjust the leveling feet as needed.
Please note that it is recommended to contact a qualified technician if you are not confident in reversing the door swing yourself.
Add New Comment