User Manual Q&AAnswer
Feb 10, 2025 - 10:24 PM
To reverse the door swing on your Lec U5017W-S-B White Static Under Counter Freezer, please follow the steps outlined in the user manual:
1. Ensure that the unit is unplugged and empty.
2. Tilt the unit backwards to take the door off. Be careful not to lay the unit flat as this may damage the coolant system.
3. Remove the two screws on the back of the unit.
4. Lift the top cover away from the fridge.
5. Remove the three screws and the upper hinge that hold the door in place. Lift the door and place it on a padded surface to prevent scratching.
6. Swap the bottom bush and bottom bush cap of the door. Make sure the bottom bush key is in the correct position for proper insertion.
7. Remove the lower screws, hinge bracket, and adjustable feet from the unit bottom.
8. Remove the xxxx -type adjustable feet from the other side of the unit bottom and transfer it to the corresponding position on the opposite side of the unit bottom.
9. Reattach the two lower screws, hinge bracket, and adjustable feet to the opposite side of the unit bottom. Loosely secure.
10. Carefully set the upper door back into place. Ensure the fridge door is aligned horizontally and vertically so that the seals are closed on all sides before finally tightening the top hinge.
11. Insert the door limiter hinge bracket and xxxx it to the top of the unit. Use a spanner to tighten if necessary.
12. Put the top cover back and fix it in place with the screws.
13. With the door closed, check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Re-adjust the leveling feet as needed.
Please note that if you are not confident in performing this procedure yourself, it is recommended to contact a qualified technician for assistance.
Add New Comment