User Manual Q&AAnswer
Feb 10, 2025 - 10:22 PM
To reverse the door swing on your Lec R5517W-S-B White Under Counter Fridge, follow these steps:
1. Ensure that the unit is unplugged and empty.
2. Tilt the unit backwards to take the door off.
3. Remove the two screws on the back of the unit.
4. Lift the top cover away from the fridge.
5. Remove the screws and the upper hinge that hold the door in place. Lift the door and place it on a padded surface to prevent scratching.
6. Swap the bottom bush and bottom bush cap of the upper door. Make sure the bottom bush key is in the correct position for proper insertion.
7. Remove the lower screws, hinge bracket, and adjustable feet from the bottom of the unit.
8. Remove the xxxx -type adjustable feet from the other side of the unit bottom and transfer it to the corresponding position on the opposite side.
9. Reattach the two lower screws, hinge bracket, and adjustable feet to the opposite side of the unit bottom. Loosely secure.
10. Carefully set the upper door back into place. Ensure that the fridge door is aligned horizontally and vertically so that the seals are closed on all sides before finally tightening the top hinge. Insert the hinge bracket and xxxx it to the top of the unit. Use a spanner to tighten if necessary.
11. Put the top cover back and fix it in place with the screws.
12. With the door closed, check that the door is aligned horizontally and vertically and that the seals are closed on all sides before finally tightening the bottom hinge. Re-adjust the leveling feet as needed.
Please note that it is recommended to contact a qualified technician if you are not confident in reversing the door swing yourself.
Add New Comment