How do I start a wash cycle on the Hotpoint NSWM 965C W UK N Washing Machine? (Hotpoint NSWM 965C W washing machine User Guide)

Answer

manuals.plus

Feb 10, 2025 - 10:15 PM


To start a wash cycle on the Hotpoint NSWM 965C W UK N Washing Machine, follow these steps:

1. Press the ON/OFF button to turn on the washing machine. The START/PAUSE indicator light will flash slowly green.
2. Open the door and load the laundry, making sure not to exceed the maximum load quantity indicated in the wash cycle table.
3. Pull out the detergent dispenser drawer and pour the detergent into the relevant compartments, as described in the "DETERGENT DISPENSER DRAWER" section of the user guide.
4. Close the door.
5. The machine will automatically display the maximum temperature and spin speed values for the selected cycle. You can modify these values by pressing the TEMPERATURE and SPIN buttons.
6. Select the desired wash cycle by turning the WASH CYCLE SELECTOR  xxxx .
7. Select any desired options by pressing the OPTION button. The indicator lights will show which options are selected.
8. Press the START/PAUSE button to start the wash cycle. The START/PAUSE indicator light will light up steady green, and the door will lock.
9. The wash cycle will begin, and the display will show the duration of the cycle. You can pause the cycle at any time by pressing the START/PAUSE button again.

Note: It is recommended to refer to the user guide for more specific instructions on selecting wash cycles and options, as well as for additional information on using the washing machine.