User Manual Q&AAnswer
Feb 10, 2025 - 10:11 PM
To adjust the air pressure for the BORMANN BAT1012 Short Air Lock 675Nm, follow these steps:
1. Locate the regulator dial (part #28) on the tool.
2. Turn the regulator dial clockwise to increase the air pressure or counterclockwise to decrease it.
3. Refer to the air pressure specifications in the owner's manual (90PSI or 6.3Kg/cm²) to set the desired pressure.
4. Use a pressure gauge to verify the air pressure if necessary.
Note: It is important to ensure that the air pressure is within the recommended range to avoid damaging the tool or compromising its performance.
Add New Comment