User Manual Q&AAnswer
Feb 10, 2025 - 09:39 PM
To attach the hand mixer to the appliance stand, follow these steps:
1. Place the appliance stand on a smooth and level work surface.
2. Press the release button and raise the swivel arm to the stop.
3. Place the bowl on the base, ensuring that the edge of the bowl completely covers the bowl drive and rotates easily.
4. On the hand mixer, move the slider to position "w". This will open the apertures for inserting the tools, with the rear aperture closed.
5. Insert the required tool pair (stirring whisks or kneading hooks) into the hand mixer and press them into position. Make sure to only use the tools that came with the stand.
6. Note the shape of the plastic parts on the tools to avoid mixing them up. Insert the tools one after the other to prevent them from getting caught.
7. Fit the back of the hand mixer onto the support so that the docking area engages in the opening on the support.
8. Hold the support and press the hand mixer down until it locks into place. Ensure that the worm gear and gear wheel mesh together correctly.
9. Press the release button and push the swivel arm down until it locks into place.
10. Your hand mixer is now securely attached to the appliance stand.
Please refer to the instruction manual for visual references (Fig. A and Fig. B) and additional safety precautions.
Add New Comment