User Manual Q&AAnswer
Feb 10, 2025 - 09:22 PM
To adjust the position of the mounting screws on the Hunter 19829 3 Light Lantern, follow these steps:
1. Remove the cap nuts (H) from the mounting screws (B).
2. Place the mounting plate (A) over the junction box so that the mounting screws (B) and nuts (C) extend out away from the ceiling.
3. Depending on the placement of your junction box, the position of the mounting screws (B) may need to be adjusted to allow the canopy to be flush with the ceiling.
4. Loosen the nuts (C) and adjust the position of the mounting screws (B) by loosening or tightening them.
5. Once the ideal position of the mounting screws (B) has been confirmed, tighten the nuts (C) on the front of the mounting plate to secure the mounting screws.
By adjusting the position of the mounting screws, you can ensure that the canopy of the light fixture is properly aligned with the ceiling.
Add New Comment