How do I install and set up the LeuchtenDirekt NILA Pendant Light LED Anthracite? (LeuchtenDirekt NILA Pendant Light LED Anthracite Owner's Manual)

Answer

manuals.plus

Feb 10, 2025 - 09:00 PM


Installation and Setup of the LeuchtenDirekt NILA Pendant Light LED Anthracite:

1. Start by ensuring that you have all the necessary components: the pendant light, remote control, and battery.

2. Choose a suitable location for the pendant light installation. Make sure it is securely mounted to a ceiling or other suitable surface.

3. Connect the pendant light to a 230V/50Hz power supply. Ensure that the power is switched off before making any electrical connections.

4. Insert the LED board into the pendant light. The LED board should be a 24V DC/38W type.

5. If you want to use the remote control, insert the battery into the remote control. The battery type and installation instructions should be provided in the remote control's manual.

6. Once the pendant light is installed and connected to power, you can turn on the power supply.

7. To control the pendant light using the remote control, aim the remote control at the pendant light and press the desired buttons to adjust the light settings. Refer to the remote control's manual for specific instructions on how to use it.

If you encounter any difficulties during the installation or setup process, it is recommended to consult the LeuchtenDirekt NILA Pendant Light LED Anthracite owner's manual for detailed instructions and troubleshooting tips. You can also contact Leuchten Direkt GmbH's customer service for further assistance using the provided contact information.