User Manual Q&AAnswer
Feb 10, 2025 - 08:53 PM
To set the DMX address for the ADJ HYDRO Profile Lighting fixture, follow these steps:
1. Power on the fixture and navigate to the System Menu on the control panel display.
2. Scroll through the menu options using the UP and DOWN buttons until you reach the "DMX Settings" option.
3. Press ENTER to select the "DMX Settings" option.
4. Scroll through the sub-menu options using the UP and DOWN buttons until you reach the "DMX Address" option.
5. Press ENTER to select the "DMX Address" option.
6. Use the UP and DOWN buttons to set the desired DMX address for the fixture. The DMX address can range from 001 to the maximum DMX address supported by the fixture.
7. Once you have set the desired DMX address, press ENTER to confirm the selection.
8. Exit the menu by pressing the MODE button.
Please refer to the ADJ HYDRO Profile Lighting User Manual for more detailed instructions and illustrations.
Add New Comment