User Manual Q&AAnswer
Feb 10, 2025 - 08:51 PM
To connect your amplifier to your speakers, follow these steps:
1. Determine the type of speakers you have. The CSA Series amplifier supports both low-impedance and high-impedance speakers.
2. For low-impedance speakers (4 Ohms minimum), connect the speaker wires to the +/- pins of the amplifier output connector. Make sure to maintain the proper polarity when wiring the speakers.
3. For high-impedance speakers (70V or 100V), connect the appropriate pin (+) to the speaker and the COM pin (-) to the amplifier output connector. The HI-Z switch on the back panel must be ON to provide audio to the high-impedance outputs.
4. Use prebuilt or professionally wired, high-quality speaker wire for optimal performance. The wire size should be selected based on the distance from the amplifier to the speakers. Refer to the guidelines provided in the manual for selecting the appropriate wire size.
5. Ensure that all connections are secure and properly insulated to prevent short circuits.
Please refer to the "Output Wiring and Connectors" section in the manual for more detailed instructions and illustrations.
Add New Comment