User Manual Q&AAnswer
Feb 10, 2025 - 08:46 PM
To connect and install the Paul Neuhaus 836744 Double Ring Hanging Lamp, please follow these steps:
1. Ensure that the power supply is turned off before starting the installation process.
2. Assemble the lamp according to the provided instructions. Make sure all components are securely attached.
3. Choose a suitable location for the lamp to be installed. It is designed to be used as a pendant light.
4. Connect the lamp to the electrical supply. The lamp requires a 230V/50Hz electrical connection.
5. If you wish to control the lamp using the remote control, you need to teach the remote control to recognize the lamp. Please refer to the Q-remote control manual for detailed instructions on how to do this.
6. If you want to integrate the lamp into a ZigBee network, you will need to reset the lamp to its factory settings. To do this, turn the lamp on and off five times in quick succession.
Please note that the LED boards in the lamp are not changeable. If you encounter any difficulties during the installation process or have further questions, you can contact Paul Neuhaus GmbH using the provided contact information:
Paul Neuhaus GmbH
Olakenweg 36
59457 Werl
Germany
Telephone: +49 (0) 2922-97 21-0
Fax: +49 (0) 2922-9721-9120
Email: info@neuhaus-group.de
Website: https://scm.paul-neuhaus.de/public/co...
For more detailed instructions and safety guidelines, please refer to the owner's manual provided with the product.
Add New Comment