User Manual Q&AAnswer
Feb 10, 2025 - 08:16 PM
To install the MIST O LED Magnetic Planet Light on a non-iron shelf, you will need a round magnet with adhesive backing. Here are the steps to follow:
1. Wipe the adhesive site on the shelf with alcohol and let it dry.
2. Remove the blue protective film and backing sticker from the round magnet with adhesive backing.
3. Stick the round magnet with adhesive backing on the cabinet or shelf where you want to place the lamp. Make sure to smooth it out and leave it in place for about 24 hours to ensure adhesiveness.
4. Connect the Type C connector interface of the lamp to a 5V 2A USB Type C charger and plug it into a socket.
5. Verify that the wire is securely mounted before connecting the lamp to the round metal sheet with adhesive backing. This will ensure a firm installation.
6. When adjusting the luminance or light color, hold the lamp to make the adjustment or remove it from the surface before making any changes. Return the lamp to its position after adjusting.
Please note that it is important to follow these installation instructions to ensure proper adhesion and stability of the lamp on non-iron shelves.
Add New Comment