User Manual Q&AAnswer
Feb 10, 2025 - 12:16 PM
To attach the needle attachment to the Franklin 35509 Sports Foot Air Pump, please follow these steps:
1. Locate the needle attachment: The needle attachment is usually stored inside the pump handle. Open the pump handle to access the needle attachment.
2. Insert the needle attachment into the pump's hose: Take the needle attachment and insert it into the pump's hose. Ensure that it fits securely.
3. Attach the pump to the ball: Take the ball you want to inflate and attach its valve securely to the tip of the needle attachment. Make sure it fits snugly.
4. Start pumping: Depress the pump lever with your foot to start pumping air into the ball. Push down on the lever in a smooth, consistent motion while maintaining a steady rhythm.
5. Check the pressure: After a few pumps, stop and check the pressure of the ball. Refer to the recommended pressure levels, which are typically stated on sports balls. Use a pressure gauge to determine the ball's pressure.
6. Adjust pressure as needed: If the ball is underinflated, continue pumping until the desired pressure is reached. Adjust the pressure as necessary. If the ball is overinflated, gently squeeze the valve with your finger or a small instrument to release some air.
7. Remove the pump: Once you have achieved the desired pressure, gently pull the needle attachment out of the valve to remove the pump.
8. Store the needle attachment: Finally, place the needle attachment back inside the pump handle for safekeeping until you need it again.
By following these steps, you can easily attach the needle attachment to the Franklin 35509 Sports Foot Air Pump and inflate your basketball or other sports balls efficiently.
Add New Comment