User Manual Q&AAnswer
Feb 10, 2025 - 12:01 PM
To set up the NETGEAR EX7500 WiFi Mesh Range Extender, follow these steps:
1. Place the extender in the same room as your existing router.
2. Plug the extender into an electrical outlet and wait for the Power LED to light solid green.
3. Connect your computer or mobile device to the extender's WiFi network. The default network name (SSID) is NETGEAR_EXT.
4. Launch a web browser on your connected device and enter http://www.mywifiext.net in the address field.
5. The New Extender Setup page will appear. Click on the "New Extender Setup" button.
6. Follow the on-screen instructions to choose your WiFi network and enter the network password.
7. Once connected, you can choose to use the same WiFi network name (SSID) and password as your existing router or create a new one.
8. Click on the "Next" button and wait for the extender to apply the settings.
9. Once the extender is set up, you can move it to a desired location within the range of your existing WiFi network.
For more detailed instructions and troubleshooting tips, refer to the NETGEAR EX7500 WiFi Mesh Range Extender User Manual provided in the link you shared.
Add New Comment