User Manual Q&AAnswer
Feb 10, 2025 - 11:54 AM
To set up the Proscenic 850T Robot Vacuum Cleaner, follow these steps:
1. Plug in the charging dock and make sure the rest wire is placed into the trunking at the bottom of the charging dock.
2. Position the charging dock on a hard, level surface against a wall, leaving enough space around it.
3. Connect the round connector of the adapter to the power socket on the charging dock and plug the other end into a wall outlet.
4. Attach the side brushes to the bottom of the robot by pressing a brush into each slot.
5. Turn on the main power switch on the bottom of the robot.
6. Place the robot onto the charging dock, ensuring that the metal charging contacts on the dock match up with those underneath the robot. You should hear a series of tones indicating successful activation.
7. Press the power button once to wake up the robot, and then press it again or use the remote control to start a cleaning cycle.
For more detailed instructions and information, please refer to the Proscenic 850T Robot Vacuum Cleaner User Manual.
Add New Comment