User Manual Q&AAnswer
Feb 10, 2025 - 11:49 AM
To switch between blow mode and vacuum mode on the BV6000, follow these steps:
1. Ensure the product is switched off and disconnected from the power supply.
2. For blow mode: Attach the blow tube assembly to the power head by aligning the upper and lower tubes and pushing them firmly together until they click into place. Make sure the fan cover is securely seated and latched into position.
3. For vacuum mode: Remove the blow tube and attach the vacuum tube assembly to the power head by aligning the notches and triangles on the upper and lower tubes. Push the lower tube firmly into the upper tube until the triangles click into place. Remove the fan cover from the bottom of the power head and attach the vacuum tube assembly by pivoting it until the locking/release catch is fully engaged.
4. Connect the cord on the power head to the power supply.
5. Turn on the blower/vacuum and adjust the speed as needed.
Please refer to the instruction manual for visual illustrations and further details on assembly and operation.
Add New Comment