User Manual Q&AAnswer
Feb 10, 2025 - 11:46 AM
To attach the ESR 2C502 HalLock Magnetic Wireless Car Charger to your car vent, please follow these steps:
1. Unscrew the nut from the socket.
2. Place the nut around the ball head with the top facing the clamp, then fully insert the ball head into the socket.
3. Tighten the nut clockwise to secure the ball head in place.
4. Attach the clamp to your car vent.
5. Magnetically attach your phone to the charger to begin charging.
Please note that the phone or phone case must have built-in magnets to work properly with this charger. Ensure that your phone supports wireless charging and does not have any credit cards, stands, or other metal attachments on the back (other than the magnetic ring). If an error is detected, check the above factors and unplug and plug in the charging cable again to resume normal charging.
For further details and visual instructions, please refer to the "Car Mounting Instructions" section in the ESR 2C502 HalLock Magnetic Wireless Car Charger User Manual.
Add New Comment