How do I install the HENDUN KS-SF03R Wireless Door Alarm with Remote? (HENDUN KS-SF03R Wireless Door Alarm Remote User Manual)

Answer

manuals.plus

Feb 10, 2025 - 11:39 AM

Here is a step-by-step guide to installing the HENDUN KS-SF03R Wireless Door Alarm with Remote:

1. Battery installation:
- For the remote control, use a minus (-) type of screwdriver to open the external cover and replace the 12V/27A battery.
- For the host, slide on the battery cover and install 2 AAA-size batteries. The host will produce a short "BI" sound to indicate successful installation.

2. Host installation:
- Select the door/window installation location and clean the surface with a clean wiper.
- Remove the double-sided tape liner from the host and adhere it to the clean surface.
- Place the magnet near the host, aligning the arrow-to-arrow marking at the same level position.

3. Cautions:
- The host is for indoor use only and should not be exposed to sunlight, rain, high pollution, or high humidity areas.
- The host's magnetic sensor is on the right side, so assemble the magnet on the right side of the host and align the arrow-to-arrow position.
- If the host is installed on the door side, install the magnet on the door frame side, and vice versa, to ensure proper functioning when the door opens.
- Ensure the distance between the host and magnet is not more than 10mm when the door is fully closed.

For a visual guide on how to install the HENDUN KS-SF03R Wireless Door Alarm with Remote, you can refer to the provided video link.

Please note that this answer is based on the information provided in the user manual for the HENDUN KS-SF03R Wireless Door Alarm with Remote. For more detailed instructions and illustrations, it is recommended to refer to the user manual.