User Manual Q&AAnswer
Feb 10, 2025 - 10:11 AM
To install the YAYITONG 40ft Led Black Light Strip Kit, follow these steps:
1. Before installation, clean the surface where you plan to install the LED strip lights using alcohol.
2. Tear off the backing tape from the LED strip lights to expose the adhesive.
3. Fix the LED strips to the cleaned area, making sure they are securely attached.
4. Connect the power adapter to the LED strip lights.
5. Plug in the power supply to an AC 110V power source.
6. Turn on the LED black light strip kit using the ON/OFF switch.
Please note that it is important to follow the manufacturer's instructions and only cut the LED strips at designated cut points to avoid damaging the wiring or LEDs. Additionally, ensure that the power source can support the wattage of the kit and do not overload electrical circuits.
If you encounter any difficulties during the installation process, refer to the YAYITONG 40ft Led Black Light Strip Kit's instruction manual for further guidance
Add New Comment