User Manual Q&AAnswer
Feb 10, 2025 - 09:57 AM
The installation of the YONHAN GSG2016P 4.2A Motorcycle Phone Charger is easy and can be done by following the included instructions and using the mounting bracket that comes with the charger. Here is a step-by-step guide to help you with the installation:
1. Determine the mounting location: Choose a suitable location on your motorcycle's handlebar to mount the charger. Ensure that it is easily accessible and does not interfere with your riding or any other components of the motorcycle.
2. Attach the mounting bracket: Use the included screws to securely attach the mounting bracket to the chosen location on the handlebar. Make sure it is tightly fastened to prevent any movement during riding.
3. Connect the charger to the battery: Locate the positive (+) and negative (-) terminals of your motorcycle's battery. Connect the red wire from the charger to the positive terminal and the black wire to the negative terminal. Ensure a secure and proper connection.
4. Route the cables: Carefully route the cables from the charger to the mounting location, making sure they are not pinched or exposed to any sharp edges that could damage them. Use the included zip ties to secure the cables and keep them neat and tidy.
5. Attach the charger to the mounting bracket: Slide the charger onto the mounting bracket and ensure it is securely attached. Double-check that all connections are tight and properly secured.
6. Test the charger: Turn on the motorcycle's ignition and check if the charger's LED indicator lights up. You can also connect a USB device to the charger to verify if it is charging properly.
Please refer to the user manual for any specific instructions or diagrams that may assist you during the installation process.
Add New Comment