User Manual Q&AAnswer
Feb 10, 2025 - 07:31 AM
To mount the PERLESMITH PSDSK1 PSDSK2 PSDSK3 Floating Wall Mounted Shelf on a wood stud wall, follow these steps:
1. Use a stud finder to locate the wood stud and mark the edge and center location.
2. Position the wall plate at your desired height and line up the holes with your stud center line. Make sure the wall plate is level.
3. Drill pilot holes using a 1/8 in (3.2 mm) diameter drill bit.
4. Secure the wall plate with the provided lag screws and washers. Tighten the lag screws until the washers are pulled firmly against the wall plate.
5. Repeat the above steps for additional wall plates if you are installing multiple shelves.
Please note that the included hardware is designed for use on vertical walls constructed of wood studs or concrete. If you are unsure about the construction of your wall, it is recommended to consult a qualified contractor or installer for assistance.
For more detailed instructions and illustrations, please refer to the PERLESMITH PSDSK1 PSDSK2 PSDSK3 Floating Wall Mounted Shelf Instruction Manual.
Add New Comment