How do I synchronize the INKBIRD IBS-P01R Wireless Pool Thermometer with the receiver? (INKBIRD IBS-P01R Wireless Pool Thermometer User Guide)

Answer

manuals.plus

Feb 10, 2025 - 06:58 AM


To synchronize the INKBIRD IBS-P01R Wireless Pool Thermometer with the receiver, follow these steps:

1. Install 4 AAA batteries (not included) in the receiver and 2 AAA batteries in the pool thermometer.
2. Make sure the pool thermometer is close to the receiver during synchronization.
3. The data of the pool thermometer will be synchronized on the receiver automatically within 2 minutes.
4. Once the synchronization is successful, the receiver will display the measured temperature of the pool thermometer and record the registration information.
5. The blue light on the pool thermometer will flash once when the data is successfully transmitted to the receiver.
6. The RF signal icon will be displayed on the receiver's screen for 5 seconds after the blue light flashes, indicating that the receiver has received the data and updated the current temperature in real-time.
7. If the receiver cannot receive data from the pool thermometer for 15 minutes or more, "--.-" will be displayed on the screen. In such cases, please repeat the synchronization steps.

Note: If you need to reset the synchronization between the pool thermometer and the receiver, hold the TX button on the pool thermometer for 5 seconds. Then, follow the synchronization steps mentioned above to re-synchronize the devices.

For more information or assistance, you can contact INKBIRD TECH.C.L at Support@inkbird.com or visit their website at www.inkbird.com.