User Manual Q&AAnswer
Feb 10, 2025 - 06:10 AM
To switch between HDMI sources using the UGREEN CM322 HDMI Switch Out 4K HDMI Switcher Splitter, you can follow these steps:
1. Connect the power supply cable to the Micro USB power supply port on the device.
2. Use HDMI cables to connect your signal sources (e.g., laptop or desktop) to the HDMI IN ports of the switcher.
3. Use another HDMI cable to connect your display device (e.g., TV) to the HDMI OUT port of the switcher.
4. Connect the IR receiver to the IRDA port on the switcher. This will allow you to use the remote control to switch the signal source.
Once everything is set up, you can switch between HDMI sources by either pressing the switch button on the device itself or using the remote control. The device will display the content of the currently connected HDMI signal source. When you disconnect a source, the device will automatically switch to the content of another connected source.
Please note that it is important to use certified HDMI cables for optimal performance. Also, make sure to connect the IR receiver before using the remote control. Avoid dismantling the device and using it in extreme temperatures, dusty, or moist climates.
Add New Comment