User Manual Q&AAnswer
Feb 10, 2025 - 06:00 AM
To connect the XTM PLU628707 200W Folding Solar Blanket to a 12V battery, follow these steps:
1. Ensure that the battery is disconnected from any power source and the vehicle ignition is switched off.
2. Unfold the solar blanket and place it in a position directly facing the sun, avoiding any shadows that may reduce power output.
3. Tilt the solar blanket at a suitable angle for optimal sunlight exposure. Additional support may be necessary to keep it in place.
4. Connect the solar blanket to the XTM 15A MPPT Solar Charge Controller using the provided cables and connectors. Pay attention to the "+" and "-" wiring to ensure correct polarity.
5. Connect the battery clamp wire from the solar charge controller to the positive and negative terminals of the 12V battery. Again, ensure correct polarity.
6. If you have any heavy loads, such as appliances or devices, connect them directly to the battery to avoid overloading the solar charge controller.
7. Once all connections are secure, you can turn on the solar charge controller. Check that the LED indicator on the controller is green, indicating that it is functioning properly.
8. The solar blanket will generate electricity in proportion to the amount of sunlight exposed to the solar panels. Keep in mind that factors like cloud cover, seasonal variations, shading, and dirt on the panels can affect performance.
9. It is important to note that the solar blanket is not waterproof or water-resistant, so avoid exposing it to water or liquids.
10. If you have any further questions or encounter any issues, refer to the XTM PLU628707 200W Folding Solar Blanket Owner's Manual for troubleshooting and technical specifications.
Please refer to the XTM PLU628707 200W Folding Solar Blanket Owner's Manual for more detailed instructions and safety precautions.
Add New Comment