User Manual Q&AAnswer
Feb 10, 2025 - 05:47 AM
To program the remote control socket, please follow the steps below:
1. Cancel the programming by referring to the "Canceling Programming" section in the manual.
2. Press and hold the program button on the receiver for 6 seconds until the indicator light starts to flash slowly.
3. Release the program button and then press the "on" or "off" button on the remote control.
4. Programming/paring is successful when the indicator light stops blinking.
Note: Each set of ON or OFF buttons can be paired with and control several outlets, and each outlet can be paired with and controlled by multiple transmitters.
For more detailed instructions and illustrations, please refer to the "Programming the Receiver" section in the instruction manual provided.
Add New Comment