How do I assemble the EXIT 200x400x122cm Pool Ladder? (EXIT 200x400x122cm Pool Ladder User Manual)

Answer

manuals.plus

Feb 10, 2025 - 05:36 AM


To assemble the EXIT 200x400x122cm Pool Ladder, please follow these steps:

1. Lay out and review all the contents of the package to familiarize yourself with all the parts you will be using during assembly. Refer to the part reference diagram in the manual for assistance.

2. Start by attaching the two ladder side frames (part reference 1) to the ladder steps (part reference 2). Use the provided screws (part reference 13) to secure the ladder steps to the side frames. Repeat this step for all ladder steps.

3. Attach the ladder feet (part reference 3) to the bottom of the ladder side frames. Use the provided screws (part reference 14) to secure the ladder feet.

4. Attach the ladder stabilizers (part reference 4) to the ladder side frames. Use the provided screws (part reference 15) to secure the ladder stabilizers.

5. Attach the ladder crossbars (part reference 5) to the ladder side frames. Use the provided screws (part reference 16) to secure the ladder crossbars.

6. Once all the components are securely attached, double-check all nuts and bolts to ensure the ladder is sturdy.

7. Place the ladder on a level and solid base next to the pool.

Please note that the above instructions are a general guide. For more specific details and illustrations, please refer to the user manual provided with the EXIT 200x400x122cm Pool Ladder.