User Manual Q&AAnswer
Feb 10, 2025 - 05:18 AM
To connect the Thermaltake Pac Core P8 DP-D5 Plus controller to your system, please follow these steps:
1. Connect the reservoir cable onto the controller.
2. Set the DIP switch on the back side of the controller to assign the number of the controller.
3. Connect the controller cable onto the mainboard (USB 2.0 9 pin) and controller.
4. Connect the power cable to the 4-pin Molex connector and controller.
5. If you want to connect two or more connectors, you can use the bridge cable to connect the controllers.
Please refer to the installation guide for visual instructions and illustrations.
Note: Make sure to download and install the TT RGB Plus software from Thermaltake's official website (https://www.thermaltake.com/downloads). The software is compatible with Windows 10 and Windows 11.
Once the software is installed, you can control and customize the lighting effects of the Pac Core P8 DP-D5 Plus using the TT RGB Plus software interface. The software allows you to pair the controller with the fan, preview and edit lighting effects, select different lighting effects, adjust color settings, create profiles, and more.
For any further assistance or troubleshooting, please consult the user manual or visit Thermaltake's official website for support.
Add New Comment