User Manual Q&AAnswer
Feb 10, 2025 - 05:14 AM
To assemble the Shark NV70 Series Navigator Professional, follow these steps:
1. Attach the handle assembly (C) to the vacuum pod (A) by aligning the tabs on the handle with the slots on the pod. Push the handle assembly firmly until it clicks into place.
2. Attach the motorized floor nozzle (B) to the vacuum pod by aligning the tabs on the nozzle with the slots on the pod. Push the nozzle firmly until it clicks into place.
3. Connect the flexible hose (D) to the vacuum pod by aligning the tabs on the hose with the slots on the pod. Push the hose firmly until it clicks into place.
4. Attach the extension wand (E) to the end of the flexible hose by aligning the tabs on the wand with the slots on the hose. Push the wand firmly until it clicks into place.
5. Attach the desired cleaning tool, such as the upholstery tool (F) or the crevice tool (G), to the end of the extension wand or the flexible hose.
For a visual reference, please refer to the assembly diagram in the Shark NV70 Series Navigator Professional User Manual.
Note: It is important to read the enclosed Shark Owner's Guide prior to using your unit for detailed instructions and safety information.
Add New Comment