User Manual Q&AAnswer
Feb 10, 2025 - 05:02 AM
To connect the Clarion CMM-30BB Hideaway Marine Source Unit to a compatible NMEA 2000® multi-function display (MFD), you will need to follow these steps:
1. Ensure that your MFD supports NMEA 2000® entertainment protocols (PGN) and may require a software upgrade. Refer to your MFD's manufacturer for device compatibility information.
2. Connect the NMEA 2000® cable to the NMEA 2000® connector on the CMM-30BB Hideaway Marine Source Unit.
3. Connect the other end of the NMEA 2000® cable to the NMEA 2000® network on your boat. This network may already be in place if you have other NMEA 2000® devices installed.
4. Follow the specific user and installation instructions provided in the owner's manual of your MFD to configure and set up the connection to the CMM-30BB Hideaway Marine Source Unit.
Note: It is recommended to consult with your MFD's manufacturer or an experienced marine electronics technician for assistance with the installation and configuration process.
Add New Comment