User Manual Q&AAnswer
Feb 10, 2025 - 05:00 AM
To replace the batteries in the Member's Mark 12 FT Hanging Reaper, follow these steps:
1. To replace the batteries in the sound box, locate the battery case cover at the bottom of the hanging reaper. Open the hook and loop closure and use a screwdriver to remove the safety xxxx . Remove the battery compartment cover.
2. Clean the battery contacts of both the battery case and the device before installing new batteries.
3. Insert three "C" batteries into the battery compartment with the correct polarity. Replace the cover and safety xxxx .
4. Turn the switch on the sound box to the "ON" position to activate it.
5. To replace the batteries in the remote control, remove the battery compartment case cover located on the back of the remote control.
6. Clean the battery contacts of both the remote control and the device before installing new batteries.
7. Insert three "AAA" batteries into the battery compartment with the correct polarity. Replace the cover and safety xxxx .
8. To activate the sound box, move the switch on the sound box to the "ON" position.
9. To activate the remote control, press the "LEFT" button to activate the LED lights or press the "RIGHT" button to activate both the lights and sounds.
Remember to remove and replace batteries by adults only. Do not mix old and new batteries, and do not mix different types of batteries. Follow the product and battery manufacturer's instructions for correct battery insertion. Remove batteries when not in use or when storing the reaper.
Please refer to the instruction manual for more detailed information and safety precautions.
Add New Comment