User Manual Q&AAnswer
Feb 10, 2025 - 04:52 AM
To install and set up the Paulmann 953.88 Solar House Number Light, please follow the instructions provided in the instruction manual. Here is a step-by-step guide:
1. Open the package and ensure that all the components are included. The components should typically include the solar panel, LED light module, house number stickers, screws, and any additional mounting accessories.
2. Choose a suitable location for the solar panel. It should be placed in an area that receives direct sunlight for most of the day. Ensure that there are no obstructions that could shade the solar panel.
3. Use the provided screws or mounting accessories to securely attach the solar panel to a wall or any other desired surface. Make sure it is positioned at an angle that maximizes sunlight exposure.
4. Next, attach the LED light module to the solar panel. There should be a connector or cable provided for this purpose. Connect the LED light module to the solar panel according to the instructions in the manual.
5. Clean the surface where you plan to install the house number stickers. Ensure that it is dry and free from any dirt or debris.
6. Carefully peel off the backing of the house number stickers and stick them onto the desired surface. Make sure they are aligned correctly and pressed firmly to ensure proper adhesion.
7. Once the installation is complete, allow the solar panel to charge in direct sunlight for at least 24 hours before using the light. This will ensure optimal performance.
8. The solar house number light should automatically turn on at dusk and turn off at dawn. However, if it does not turn on, check that the solar panel is receiving sufficient sunlight and that the battery is fully charged.
For more detailed instructions and troubleshooting tips, please refer to the Paulmann 953.88 Solar House Number Light Instruction Manual provided with the product.
Add New Comment