User Manual Q&AAnswer
Feb 10, 2025 - 04:33 AM
To pair the Conambo K10C Bluetooth headset with your phone, follow these steps:
1. Turn on the headset by sliding the switch down. The blue indicator will flash once, and you will hear a voice prompt saying "Power on."
2. Enter pairing mode by either of the following methods:
- When you power on the headset for the first time, the blue and red indicators will flash alternately, and you will hear a voice prompt saying "Pairing."
- Alternatively, you can hold the Multi-Function Button for 5 seconds until the blue and red indicators flash alternately when the headset is powered on.
3. Put on the headset and make sure it is in pairing mode (the headset indicator flashes red and blue alternately).
4. On your phone, go to the Bluetooth settings and put it in Bluetooth Search/Scan Mode.
5. Select "K10C" from the list of available devices to pair. If prompted, enter the password "0000."
6. Once connected, you will hear a voice prompt saying "Connected," and the blue indicator on the headset will flash once.
Note: If you want to pair and connect the headset with a second device, make sure to turn off the Bluetooth function of the first device. Then, while the headset is powered on, hold the Multi-Function Button for 5 seconds until the headset enters pairing mode (red and blue indicators flash alternately). Put your second device in Bluetooth Search/Scan Mode and select "K10C" to connect.
For more information and troubleshooting, refer to the user guide provided with the headset.
Add New Comment