User Manual Q&AAnswer
Feb 10, 2025 - 04:27 AM
To charge the V-TAC 11377 Battery for Solar Inverter, follow these steps:
1. Ensure that the solar inverter is turned off and disconnected from any power source.
2. Connect the positive (+) and negative (-) terminals of the battery to the corresponding terminals on the solar inverter.
3. Make sure the battery is placed in a well-ventilated area and away from any flammable materials.
4. Connect the charger to a power source that matches the specified charge voltage of 54.0V.
5. Set the charger to the standard charge current of 20A at 25°C.
6. Turn on the charger and allow the battery to charge until it reaches its full capacity. The charging time may vary depending on the current charge level of the battery.
7. Once the battery is fully charged, disconnect the charger from the power source and disconnect the battery from the solar inverter.
It is important to follow the manufacturer's instructions and safety guidelines provided in the user manual for optimal charging and to ensure the longevity of the battery.
Add New Comment