How do I connect the Dongguan Herun Electronic Technology RF9013 2.4g Keyboard to my computer? (advancegin Herun Electronic RF9013 Keyboard User Manual)

Answer

manuals.plus

Feb 10, 2025 - 04:21 AM

To connect the Dongguan Herun Electronic Technology RF9013 2.4g Keyboard to your computer, you have three methods of code matching:

1. Method 1: Combine key pair codes:
- Press "ESC" + "+/=" for 1 second at the same time.
- The keyboard enters the code matching mode (the low voltage indicator is on long).
- Insert the receiver within 20 seconds to code success. The LED will immediately turn off.
- If the code matching fails, after 20 seconds, the keyboard exits the code matching mode and the LED turns off.

2. Method 2: Code key Code:
- Press the code key.
- The keyboard enters the code mode (low voltage indicator light long on).
- Insert the receiver within 20 seconds.
- The LED will be turned off immediately if the code matching is successful.
- If the code matching fails, after 20 seconds, the keyboard exits the code matching mode and the LED turns off.

3. Method 3: Software code matching:
- Open the code matching software.
- Insert the receiver into the USB interface.
- The software will automatically enter the code matching mode.
- Press the keyboard code matching key or "ESC" + "+/=" key for 1 second within 20 seconds to code.
- If the code is successful, the software will display "Keyboard code matching success".
- Otherwise, the code matching mode will be launched 20 seconds later.

Please refer to the user manual for more detailed instructions and illustrations on code matching and other functions of the Dongguan Herun Electronic Technology RF9013 2.4g Keyboard.