How do I install the Xprite ‎UGL-62709-G1 Car Underglow Neon Accent Strip Lights Kit? (Xprite ‎ Car Underglow Neon Accent Strip Lights Kit User Guide)

Answer

manuals.plus

Feb 10, 2025 - 04:20 AM

To install the Xprite ‎UGL-62709-G1 Car Underglow Neon Accent Strip Lights Kit, follow these steps:

1. Clean the mounting areas: Before sticking the LED strips, make sure to clean the mounting surfaces for better adhesion.

2. Use zip ties for added security: If possible, use zip ties to secure any loose cables and tighten up any wires for a more secure installation.

3. Apply the LED strips under the car: The LED strips come with pre-applied adhesive tape and quick-connect plugs. Peel off the backing of the adhesive tape and stick the LED strips in the desired locations under the car.

4. Connect the LED strips: Use the quick-connect plugs to connect the LED strips together. The kit includes 2 3FT and 2 4FT LED strips with quick-connect plugs.

5. Extend the wiring if needed: If the LED strips need to be placed further apart, the kit includes a 3FT extension wire that can be used to extend the length between the LED strips.

6. Connect to power: The kit includes a cigarette plug with a switch. Connect the positive and negative power wires from the LED strips to the cigarette plug. Make sure to separate the positive and negative poles at the connection between the cigarette lighter and the controller using the included in-line fuse.

7. Control the lights: The kit includes a remote control and a control box/sensor. Use the remote control to adjust the brightness, turn the lights on/off, select from 8 preset colors, choose from 4 lighting effects, and activate 4 sound active modes.

Please refer to the Xprite ‎UGL-62709-G1 Car Underglow Neon Accent Strip Lights Kit User Guide for more detailed installation instructions and safety precautions.