User Manual Q&AAnswer
Feb 10, 2025 - 04:13 AM
To connect the BD-OR-SAT-F FTTH WDM Optical Receiver to your power supply, follow these steps:
1. Locate the POWER IN port on the device.
2. Connect the DC+5V external voltage stabilizer output line to the POWER IN port.
3. Insert the DC+5V external mano-stat into a power outlet with a voltage range of 100/240V.
4. Once the power is connected, the power light on the device should illuminate, indicating that the power supply is working properly.
Please note that the device requires an external AC power supply with a voltage range of 90-255V, which is then converted to DC+5V for the device's operation.
Add New Comment