User Manual Q&AAnswer
Feb 10, 2025 - 03:56 AM
To install the PHILIPS 9454090431 Hue 4" Color Downlight Retrofit, please follow these steps:
1. Before starting the installation, make sure to turn off the electrical power at the main fuse or circuit breaker box.
2. Ensure that you have the correct color of wiring before installation: white (N), black (L), and green or bare copper wire (Ground).
3. Do not connect the luminaire to a non-grounded electrical system. This could pose a risk of electric shock.
4. Use wire nuts/connectors rated for the correct gauge and number of wires used. Make sure no bare wire strands are exposed outside of the wire nuts/connections.
5. Take care not to damage or cut the wire insulation during installation. Avoid allowing wires to contact any sharp edges.
6. Do not remove the thermal insulation pad(s) as it can result in increased temperatures and a possible risk of fire.
7. Maintain the interior lighting by using a dry cloth duster. Do not use abrasives or solvents, and avoid liquid contact with electrical parts.
8. Always consider the technical specifications of the luminaire and verify the icons on the identification label and safety instructions.
9. If you have any doubts or concerns, consult a qualified electrician or contact your retail outlet for assistance.
Please refer to the complete user guide provided with the product for more detailed instructions and safety information.
Add New Comment