How do I install the i-PRO Z4-S61302-W Network Camera? (i-PRO Z4-S61302-W Network Camera Installation Guide)

Answer

manuals.plus

Feb 10, 2025 - 03:48 AM

To install the i-PRO Z4-S61302-W Network Camera, please follow these steps:

1. Precautions: Before starting the installation, make sure to read and understand the precautions mentioned in the Installation Guide to ensure safe and proper installation.

2. Select an appropriate installation area: Choose a suitable location for the camera installation, such as a strong wall or ceiling. Make sure the installation area is capable of supporting the weight of the camera.

3. Mounting the camera: Securely mount the camera to the chosen surface using the recommended wall or ceiling mount brackets. Refer to the Installation Guide for specific instructions on mounting the camera.

4. Power supply: Connect the camera to a 12V DC power supply or a Power over Ethernet (PoE) device. Make sure the power supply is in the same building as the camera.

5. Wiring: Perform the necessary wiring for the camera. Ensure that the wiring is done correctly and follow the instructions provided in the Installation Guide to avoid any electrical hazards.

6. Network connection: Connect the camera to an Ethernet or PoE network without routing to the outside plant. Ensure that the network connection is properly established.

7. Testing and setup: Once the camera is installed and connected, follow the instructions in the Operating Instructions manual to perform the necessary settings and configure the camera for operation.

Please note that this is a general overview of the installation process. For detailed instructions and specific information, refer to the i-PRO Z4-S61302-W Network Camera Installation Guide provided with the product.