User Manual Q&AAnswer
Feb 10, 2025 - 03:37 AM
To connect speakers to the OMNITRONIC MA Series PA Mixing Amplifier, follow these steps:
1. Determine the type of speakers you have:
- If you have PA speakers with 70 V or 100 V audio transformers, use the "70V" or "100V" terminals on the amplifier.
- If you have low-impedance speakers (4-16 ohms), use the "4Ω", "8Ω", or "16Ω" terminals on the amplifier.
2. Make sure the amplifier is turned off before making any connections.
3. Connect the positive (+) terminal of the speaker to the corresponding positive (+) terminal on the amplifier. This is usually indicated by a "+" symbol or a red color.
4. Connect the negative (-) terminal of the speaker to the corresponding negative (-) terminal on the amplifier. This is usually indicated by a "-" symbol or a black color.
5. Repeat steps 3 and 4 for each speaker you want to connect.
6. Once all speakers are connected, double-check the connections to ensure they are secure and properly connected.
7. Turn on the amplifier and adjust the volume controls and settings as desired.
Note: It is important to follow the instructions provided in the user manual and consult with a skilled professional if you are unsure about the installation process.
Add New Comment