User Manual Q&AAnswer
Feb 10, 2025 - 03:24 AM
To initialize the Dahua DH-IPC-HUM8441-E1-L4 Pinhole Network Camera, please follow these steps:
Step 1: Connect the camera to your network using an Ethernet cable.
Step 2: Download and open the ConfigTool software on your computer.
Step 3: In the ConfigTool software, click on "Modify IP" and select the appropriate search method to find the camera on your network.
Step 4: Once the camera is detected, select it in the ConfigTool software and click on "Initialize".
Step 5: Follow the on-screen prompts to initialize the camera. You may be asked to provide an email address for password reset purposes.
Step 6: After the initialization process is complete, click on "Finish" to exit the ConfigTool software.
Once the camera is initialized, you can access its web interface by opening a web browser and entering the camera's IP address in the address bar. You will be prompted to enter the username and password that you set during the initialization process.
For more detailed instructions and information, please refer to the "Network Configuration" section of the Dahua DH-IPC-HUM8441-E1-L4 Pinhole Network Camera User Guide.
Add New Comment