User Manual Q&AAnswer
Feb 10, 2025 - 03:01 AM
To change the mode and settings on the QTX Pixel-Bar LED wall strobe bar, you can use the side panel controls. Here is a step-by-step guide:
1. Press the "MENU" button to enter the settings menu.
2. Use the "UP" and "DOWN" buttons to navigate through the various setting functions.
3. Press the "ENTER" button to confirm the desired setting.
Here are the different modes and settings you can adjust:
- Auto mode: Select the desired auto mode (SP1 - SP10) and adjust the speed from slow to fast.
- DMX mode: Select the DMX mode (3CH, 5CH, 8CH, 24CH, 48CH, 53CH) and set the DMX address.
- Show mode: Choose from programmed show modes (Sh1 - Sh54) and adjust the speed and strobe settings.
- Sound mode: Select sound-activated modes (Sou1 - Sou3) and adjust the sensitivity.
- Edit color: Adjust the dimming levels for red, green, and blue colors.
- Static colors: Choose from static RGB colors (CL00 - CL26).
- Slave mode: Allows the unit to automatically identify the host.
- Setting adjust: Adjust the backlight board time and setting direction.
- Information: Displays the current software version.
Please refer to the user manual for more detailed instructions and information on each mode and setting.
Add New Comment