User Manual Q&AAnswer
Feb 10, 2025 - 03:00 AM
To install the SDMC NE1611B WiFi Cable Modem Router, follow these steps:
1. Position the device vertically on a stable surface, ensuring the foot stand is properly attached.
2. If you prefer to wall mount the device, use two screws horizontally on the wall, 132 mm apart, using hollow wall anchors for stability.
3. Install the unit near a power outlet so that the AC adaptor can be easily connected without stressing the cable.
4. Connect the device according to the installation instructions provided in Figure 3 of the user manual.
Please refer to the user manual for detailed illustrations and instructions on the installation process.
Add New Comment