User Manual Q&AAnswer
Feb 10, 2025 - 02:52 AM
To change the brightness level on the WALTHER HLC1r Headlamp, follow these steps:
1. Locate the power switch on the headlamp. It is labeled as the "Mode Switch" in the overview section of the instruction manual.
2. Press the power switch to turn on the headlamp. The headlamp will turn on at the last used brightness level.
3. To cycle through the different brightness levels, press the power switch repeatedly. The available brightness levels are Turbo, High, Medium, and Low for the white LED, and High and Low for the red LED.
4. Keep pressing the power switch until you reach the desired brightness level. The headlamp will stay at that level until you change it again.
Note: The instruction manual provides specific measurement values for each brightness level, which may vary depending on factors such as temperature and battery type.
Please refer to the instruction manual for additional information on other features and functions of the WALTHER HLC1r Headlamp.
Add New Comment