User Manual Q&AAnswer
Feb 10, 2025 - 02:44 AM
To install the FISHER PAYKEL HP90iHCB3 90cm Integrated Canopy Extractor, please refer to the Installation Guide provided by Fisher & Paykel. The installation process may vary depending on your specific kitchen setup, so it is important to follow the instructions provided in the guide.
Here are some general steps to guide you through the installation process:
1. Before starting the installation, ensure that the power supply to the unit is switched off.
2. Determine the ideal location for the canopy extractor, ensuring that it is centered above your cooking area and has sufficient clearance from any nearby cabinets or obstacles.
3. Mark the positions for mounting screws on the underside of the cabinet or rangehood enclosure, following the instructions in the Installation Guide.
4. Drill pilot holes at the marked positions to facilitate the installation of the mounting screws.
5. Attach the mounting brackets to the cabinet or rangehood enclosure using the provided screws.
6. Lift the canopy extractor into position, aligning it with the mounting brackets.
7. Secure the canopy extractor to the mounting brackets using the provided screws.
8. Connect the electrical wiring according to the instructions in the Installation Guide. It is recommended to consult a qualified electrician for this step if you are not familiar with electrical work.
9. Once the installation is complete, double-check all connections and ensure that the unit is securely mounted.
10. Switch on the power supply and test the functionality of the canopy extractor.
Please note that these are general guidelines, and it is crucial to refer to the specific instructions provided in the Installation Guide for your model. If you encounter any difficulties during the installation process, it is recommended to contact Fisher & Paykel's Customer Care Centre for further assistance.
Add New Comment