User Manual Q&AAnswer
Feb 10, 2025 - 02:34 AM
To assemble and install the , please follow these steps:
1. Read the safety warnings in the instruction manual thoroughly before starting the assembly process.
2. Ensure that the product is suitable for connection to a 220-240V~ 50Hz supply. It is designed for indoor use only and should not be used in a bathroom.
3. As this fitting is a Class II, Double Insulated product, it does not require an Earth connection. Do not connect the Live or Neutral wires to Earth.
4. Before plugging in or using the product, make sure it is fully assembled. Disconnect it from the mains during assembly or maintenance. Place the desk light on a stable and flat surface.
5. Never cover the lamp with any material, as it can pose a safety hazard.
6. This product is not suitable for persons under 14 years of age.
7. Handle and maintain the product with care to avoid breakage of delicate parts.
8. The lamp must be protected by a 3 amp fuse in the mains plug.
9. Only use bulbs with wattage specified on the label, as using higher wattage bulbs may damage the fitting.
10. Do not put anything on the product or hang anything on any part of it.
11. If the external flexible cable or cord of the luminaire is damaged, it should only be replaced by a qualified electrician to avoid electrical hazards.
12. Dispose of waste electrical products properly by recycling where facilities exist. Check with your Local Authority or local store for recycling advice.
For any further questions or doubts about the installation or use of this product, it is recommended to consult a qualified electrician.
Note: If you plan to use this item in Europe, the 3 pin adaptor can be removed by loosening the central xxxx and removing the adaptor to reveal the 2 pin Europe plug.
Please refer to the instruction manual for more detailed information and illustrations.
Add New Comment