User Manual Q&AAnswer
Feb 10, 2025 - 01:31 AM
To install the NEXXIT Smart WiFi 3 Circuit Light Switch, please follow the steps outlined in the user guide:
1. Shut off power at the circuit breaker for the electrical box where the switch will be installed.
2. Remove the original switch from the wall box and identify the Line, Load, Neutral, and Ground wires.
3. Label the wires according to the color code standards for your region.
4. Mount the smart switch using the provided screws, ensuring that each wire is connected to the correct terminal on the switch.
5. Gently push all excess wiring into the electrical box and align the smart switch to the base on the electrical box.
6. Insert the pre-installed screws on the switch through the mounting holes on the electrical box and tighten them to secure the switch to the wall.
7. Restore power at the circuit breaker to power on the smart switch.
For a more detailed and visual guide, please refer to the user guide provided with the product.
Note: It is important to follow all safety precautions and consult a qualified electrician if you are not familiar with hardwired electrical connections.
Add New Comment