User Manual Q&AAnswer
Feb 10, 2025 - 12:59 AM
To clean the condenser of the U-LINE UHRF124 24” Refrigerator Freezer, please follow these steps:
1. Disconnect the power to the unit before cleaning the condenser. This is important for safety purposes.
2. Remove the front grille of the unit. You can do this by loosening the two screws on the grille and then pulling it out from the unit.
3. Once the grille is removed, you can access the condenser coil. The condenser coil can be cleaned using a soft brush or a vacuum cleaner. Be careful not to touch the condenser fins as they are sharp and can be easily damaged.
4. Clean the condenser coil thoroughly, removing any dust or debris that may have accumulated. You can use a soft brush to gently brush away the dirt or use a vacuum cleaner to suck up the dust.
5. After cleaning the condenser coil, reinstall the front grille by aligning the holes on the grille with the corresponding holes on the unit. Tighten the screws to secure the grille in place.
Cleaning the condenser coil regularly, at least every six months, will help maintain the operational efficiency of the unit and prevent any performance issues.
Add New Comment