User Manual Q&AAnswer
Feb 10, 2025 - 12:05 AM
There could be a few reasons why your Whirlpool FFT M22 9X2B UK Heat Pump Tumble Dryer is not turning on. Here are some possible causes and solutions:
1. Check the plug: Make sure that the plug is properly inserted into the socket. If it is loose or not fully inserted, try reinserting it securely.
2. Faulty plug: If the plug is inserted correctly but the dryer still doesn't turn on, the plug itself may be faulty. Try plugging another appliance into the same socket to see if it works. If not, you may need to replace the plug.
3. Power failure: If there has been a power failure in your area, wait for the power supply to be reactivated. Once power is restored, try turning on the dryer again.
4. Door open: Ensure that the door of the dryer is fully closed. If the door is not closed properly, the dryer will not start.
5. Time delay or Start/Pause button: If a time delay for the start of the program has been set, you may need to wait for the set time to elapse before the dryer starts. Also, make sure that the Start/Pause button has been pressed to initiate the program.
6. Key Lock function: If your machine is equipped with the Key Lock function, it may be enabled. In this case, you need to switch off the machine to reset the Key Lock. Refer to the options section in the user manual for instructions on disabling the Key Lock function.
If none of these solutions resolve the issue, it is recommended to contact the Whirlpool Service Centre for further assistance.
Add New Comment